• Slurry Sampler
  • Slurry Sampler structure

Slurry Sampler

Slurry Sampler produced by ZJH minerals is mainly used  for getting the sample of slurry in the pipe of ore dressing plant. It is installed on ore pulp pipe, and the flow sample is intercepted vertically through the sampling pipe of the sampler.

Slurry Sampler produced by ZJH minerals is mainly used  for getting the sample of slurry in the pipe of ore dressing plant for mining and mineral processing industry.

working principle:

The slurry sampler is installed on ore pulp pipe, and the flow sample is intercepted vertically through the sampling pipe. When up to the setting time, the controller motor send out operating instructions, the motor spins force make up at a constant speed sampling tube along the guide pipe by the mechanical transmission system, sampling tube entrance to be automatically open, began to vertical sampling, after the completion sampling, instructions issued by the control system to make the sampling pipe drop and eventually stop at the position of no slurry wear.

Structure:

The sampler is a overall automatic equipment, including steel shell, stainless steel sampling tube, regulating tube, tin bronze guide device, motor, reducer and mechanical transmission system, electronic intelligent control part. The normal working condition is not sampling,the sampling tube controlled by the intelligent electronic is in the sealing rubber sleeve of guide device under the shell.

Slurry Sampler structure

 

Features:

1, Through automatic control of sampling points, intelligent random sampling, to avoid human interference;Instead of manual sampling, so as to improve the representativeness of samples, reduce labor intensity, improve the accuracy and automation of analysis and testing.
2, New structure, reasonable design, reliable performance, convenient installation and simple operation.
3, pipeline installation, no need for any height difference, no drop loss to pulp.
4, the electrical part adopts photoelectric program control technology, start and stop time is accurate, with perfect protection of electrical appliances, simple control, sensitive action, safe and reliable.
5, The shell of the sampler is made of thick seamless steel pipe, and the inner wall of the pipe is lined with 5mm thick ceramic wear resistant layer, and the operation life is more than 6-8 years. In addition, our company uses flame spraying technology and special composite materials can make this product to reach more than 15 years of life.

Technical details

Material: Motor model: Y80M-4-4;  Pipe: thick wall seamless pipe;  Sampling tube: 1Cr18Ni9;  Guide tube: QSN4-4-4;  Other parts: steel parts.
Slurry pipe specification: ¢50-600mm pipe can be customized according to client’s actual size.
Technical parameters: Installation Angle 0~60 °;  Motor working voltage  AC380V (customization on client’s local voltage); Controller working voltage AC 220V (customization on client’s local voltage);  Motor power 0.55~ 0.75kW;  Sampling period 2~60 minutes (adjustable); Sampling time: 3.5s/ time. Working pressure 1.0MPa.
Usage requirements: the specifications of the flange at both ends of the sampler must be consistent with that of the slurry pipe flange for easy installation and replacement.